Reverse osmosis RO membrane TORAY TMG10D 4" (10.8 m3/day) Low pressure

Reverse osmosis membranes Toray TMG-10D (4040) manufactured by Toray (Japan) provide effective water purification from a wide range of dissolved substances of both organic and inorganic origin (up to 99.7%). TMG-10D membranes are designed for desalination of water with salt content up to 2000 mg/l.

Characteristics:

• Productivity - 10.8 m³/day.

• Operating pressure - 10.3 bar.

• Selectivity - 99.7%.

• Active area - 8.0 m2.

• Separating mesh thickness - 31 (0.79) mil (mm).

• Restrictions on operating conditions:

Under certain conditions, the presence of free chlorine and other oxidizing agents causes early deterioration of the membrane. Since oxidation damage is not covered by the warranty, the manufacturer recommends that residual chlorine be removed during the pre-treatment stage before reaching the membranes.

Peculiarities:

• High selectivity;

• Low pressure;

• High performance;